Skip to content
Starlink, solar, CCTV, WiFi & electrical installationTalk to our team +254742648998
Spacekits

Faceplate Kenya | Buy & Install 2027 — Ethernet Outlet Buying Guide

Buying an Ethernet faceplate in Kenya? Check the port count, compatible jacks, back box, cable and test results before ordering.

If you are comparing Ethernet faceplates in Kenya, ask the supplier for a photo of the front and rear of the exact model. The number of openings tells you how many modules it can hold. It does not tell you whether the modules, back box or fitting are included.

An Ethernet faceplate is the visible wall plate that holds the network jacks. If you are adding a wired connection to a desk, TV area or Wi-Fi access point, check whether the advertised price includes the jacks. A plate with two openings may be sold as the plate alone, or supplied with two matching modules.

Check compatibility before buying

Confirm the number of ports, the back-box size and depth, and whether the plate accepts the proposed keystone or modular jack. Ask the installer to match the jack and cable to the network specification and label both ends. If the location is exposed to moisture, ask for an enclosure suitable for the location.

What a fitted quote should include

Ask for separate prices for the plate, modules, back box and any new cable run. Include termination and testing in the scope. If an access point or camera will use Power over Ethernet, confirm the full connection can support the device before the wall is closed.

Before ordering, confirm the model, what’s in the pack, stock and fitted price with the supplier.

One port, two ports or a spare opening?

Use one port for a fixed device where space is tight. For a home office, two terminated ports can let a desk phone or another wired device connect without adding a small switch. An empty opening can be covered with a blank until a second cable is pulled. Confirm each active port has its own run to a patch panel or other agreed endpoint. If the outlet will feed an access point, first work out where coverage is needed using the SpaceKits Wi-Fi planning guide.

Use a parts list when comparing prices

Request the faceplate, compatible jacks, back box, cable and termination as separate items. Ask whether the quote includes patch leads, labels at both ends and any making good after work. For an existing opening, send the dimensions and a photograph of the installed box so the supplier can check mounting and depth before delivery.

Decide what counts as a passed outlet

Agree whether the handover includes a basic wire-map test or certification to a specified cable category. For an access point or camera, also check that the actual device powers on and connects through the outlet. If your project includes cameras, the Kileleshwa apartment CCTV guide explains how to document recorder and cable compatibility before retaining existing runs. Ask for an outlet schedule so you can match each wall label to the corresponding port at the cabinet.

Five checks for an Ethernet faceplate

Confirm the plate format, port count, matching jacks, back-box depth and the level of testing in the quote. For two working ports, check the installer has included two jacks and a separately identified cable run for each. A spare opening can take a blank until a second run is needed.

Example for a home office

For a desk with a computer and an IP phone, ask whether both devices need separate connections and whether the phone needs power through the network. A photo of the existing back box and the available ports at the network cabinet helps the installer quote accurately. Ask them to state who supplies the patch leads.

What to do if an outlet fails testing

Have the installer identify the failing run by its label, document whether the issue is at a termination or along the cable route, and quote any replacement before opening the wall. For a network camera, test it from the actual outlet with the intended switch and check that the recorder receives its feed.

Check what happens when desks move

If an office layout will change, identify the wall outlets that will be accessible after furniture is installed. A jack hidden behind a fixed cabinet can be costly to reuse. Ask whether spare routes or blank positions can be provided while the walls are open. At handover, match each label to the cabinet schedule and record the test result for that outlet. Keep the exact jack and plate model so replacements fit later.

Which test report should you request?

For an Ethernet faceplate replacement on an existing run, ask for a wire-map result to confirm the conductors are connected correctly. If the job specifies a link category, request a certification report against that category for each labelled run. If the question is whether existing cable can support a specific network speed, ask whether qualification testing is included. Fluke Networks explains the difference between verification, qualification and certification.

Need CCTV, WiFi or Starlink installation?

SpaceKits helps homes, offices, shops and businesses plan CCTV, extend WiFi coverage and install Starlink in Kenya. Tell us your location and property type for a practical next step.

Request a QuoteChat on WhatsApp

Need hands-on help?

Have a project in mind? Let us plan the next step.